Welcome to visit Beijing Songyuan Huaxing official website!
E-mail: sales@bjsyhx.com.cn
Product List
Breaking News
What are the advantages of a laboratory freeze dryer used in a laboratory over conventional methods?
The laboratory freeze dryer uses the physical principle to freeze the moisture in the compressed air to below the dew point, so that it can be precipitated from the air....
Analysis on the drying principle of freeze dryer
I believe everyone is familiar with freeze dryers. Such a machine that integrates freezing and drying has been favored by most experiments. The principle of freeze drying of freeze dryers is actually not complicated. Freezing and drying are divided into two processes. ...
How to properly maintain an industrial vacuum freeze dryer?
Industrial vacuum freeze dryer is composed of refrigeration system, vacuum system, heating system, electrical instrument control system. ...
What is the control system of industrial vacuum freeze dryer?
The control system of industrial vacuum freeze dryer is the command mechanism of the whole machine....
Analysis of periodic inspection and maintenance methods of pilot freeze dryer
Repair and eliminate the leakage and failure of the refrigeration system, vacuum system and heating system, and check whether the indicators of the pilot freeze dryer are in a normal state;...
Contact Us
Beijing Songyuan Huaxing
Service Line:+86-13161061291
Song Yuan:+86-13161061291
Address:C706 Changyin Building, NO.88 Yongding Road, Haidian District, Beijing, China
Email:sales@bjsyhx.com.cn
Facebook:SYHXfreezedryer
Your Location: Home >> News >> Technical support >> What preparations need to be done before the pilot Freeze Dryer works?

What preparations need to be done before the pilot Freeze Dryer works?

Release Date: 2020/5/29 13:48:11 .
Browse: 511

  As we all know, when using the pilot freeze dryer for the first time, we must thoroughly clean the parts of the dryer. Everyone knows that stainless steel parts are washed with ethanol, and plexiglass is washed with physiological saline. Ampoules are cleaned with an ultrasonic cleaner, but what preparation do we need to do before testing the freeze dryer in real operation?
  The pilot freeze dryer must be pre-frozen before operation and use. The pre-freeze needs to prepare a low-temperature refrigerator, minus 40 degrees Celsius, or minus 80 degrees Celsius low-temperature refrigerator, and place the items to be dried in a low-temperature refrigerator or liquid nitrogen It usually takes about four hours. It can be observed directly from the outside. After the items are completely frozen, the freeze-drying experiment can be carried out. The items are quickly moved into the tray of the pilot freeze-drying machine to ensure the freeze-drying effect.
  The green vacuum tube connects the main unit and the vacuum pump, and the connection uses international standard clamps. In order to effectively prevent the leakage of air, this type of clamp is specially designed with a sealing rubber ring in the clamp, apply an appropriate amount of vacuum grease on the rubber ring, and then clamp with the clamp to make the connection more closely fit in Together, to effectively prevent air leakage. If the clamp is not clamped, it will cause air leakage, which will cause the instrument panel to display a digital display value greater than 20pa during vacuum extraction. At this time, the air tightness of the glass cover of the vacuum pump and the pilot freeze dryer should be checked.
  There are two power sockets on the right side panel of the main unit of the pilot freeze-drying machine, one is to connect the power cord of the vacuum pump to the main unit, and then the main power supply of the second pilot freeze-drying machine is plugged in.
  Before the operation of the vacuum pump, you must check whether the vacuum pump oil is added, otherwise it will not run normally. The oil level should not be lower than the center line of the oil mirror. The vacuum pump will have a strong jitter when it is first used, and it will gradually become stable.
  If the air tightness is not good, you should apply some vacuum grease to the sealing rubber ring above the cold trap, lightly spin the plexiglass cover on the rubber ring, and test the tightness by turning on the vacuum pump. To ensure its integrity.

share to:
Songyuan Freeze Dryer logo
Address:C706 Changyin Building, NO.88 Yongding Road, Haidian District, Beijing, China
Hotline:+86-13161061291
Email:sales@bjsyhx.com.cn Facebook:SYHXfreezedryer
Fax:+86-10-58895379